 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DATA SHEET GaAs INTEGRATED CIRCUIT PG2409T6X HIGH POWER SPDT SWITCH FOR WiMAX TM DESCRIPTION The PG2409T6X is a GaAs MMIC high power SPDT (Single Pole Double Throw) switch for WiMAX. This device can operate from 0.05 to 6.0 GHz, with low insertion loss and high isolation. suitable for high-density surface mounting. This device is housed in a 6-pin plastic TSON (Thin Small Out-line Non-leaded) (T6X) package, and is FEATURES * Switch control voltage * Low insertion loss : Vcont (L) = 0 V TYP. : Vcont (H) = 3.0 V TYP. : Lins = 0.45 dB TYP. @ f = 2.5 GHz : Lins = 0.55 dB TYP. @ f = 3.8 GHz : Lins = 0.65 dB TYP. @ f = 6.0 GHz : ISL = 30 dB TYP. @ f = 3.8 GHz : ISL = 30 dB TYP. @ f = 2.5 GHz * High isolation * Power handling * High-density surface mounting : 6-pin plastic TSON (T6X) package (1.5 x 1.5 x 0.37 mm) : Pin (1 dB) = +36.0 dBm TYP. @ f = 0.05 to 6.0 GHz : ISL = 27 dB TYP. @ f = 6.0 GHz APPLICATIONS * WiMAX and Wireless LAN (IEEE802.11a/b/g/n) ORDERING INFORMATION Part Number Order Number Package 6-pin plastic TSON (T6X) (Pb-Free) Marking G5R Supplying Form * Embossed tape 8 mm wide * Qty 3 kpcs/reel * Pin 1, 6 face the perforation side of the tape PG2409T6X-E2 PG2409T6X-E2-A Remark To order evaluation samples, please contact your nearby sales office. Part number for sample order: PG2409T6X-A Caution Although this device is designed to be as robust as possible, ESD (Electrostatic Discharge) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions must be employed at all times. The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Document No. PG10773EJ01V0DS (1st edition) Date Published July 2009 NS 2009 PG2409T6X PIN CONNECTIONS AND INTERNAL BLOCK DIAGRAM (Top View) 1 2 3 6 5 RF1 1 GND 2 (Top View) Vcont1 6 6 RFC 5 5 Vcont2 4 4 (Bottom View) 1 2 3 Pin No. 1 2 3 4 5 6 Pin Name RF1 GND RF2 Vcont2 RFC Vcont1 SW TRUTH TABLE Vcont1 High Low Vcont2 Low High RFC-RF1 ON OFF RFC-RF2 OFF ON ABSOLUTE MAXIMUM RATINGS (TA = +25C, unless otherwise specified) Parameter Switch Control Voltage Input Power Operating Ambient Temperature Storage Temperature Symbol Vcont Pin TA Tstg Ratings +6.0 Note Note Vcont1 - Vcont2 6.0 V RECOMMENDED OPERATING RANGE (TA = +25C, unless otherwise specified) Parameter Operating Frequency Switch Control Voltage (H) Switch Control Voltage (L) Control Voltage Difference Symbol f Vcont (H) Vcont (L) MIN. 0.05 2.7 -0.2 -0.1 TYP. - 3.0 0 0 MAX. 6.0 3.3 0.2 0.1 Unit GHz V V V Note Vcont (H) = Vcont1 (H) - Vcont2 (H) G5R RF2 4 3 Remark Exposed pad : GND Unit V dBm C C +36 -45 to +85 -55 to +150 Vcont (H), Vcont (L)Note Vcont (L) = Vcont1 (L) - Vcont2 (L) 2 Data Sheet PG10773EJ01V0DS PG2409T6X ELECTRICAL CHARACTERISTICS (TA = +25C, Vcont (H) = 3.0 V, Vcont (L) = 0 V, ZO = 50 , DC blocking capacitors = 8 pF, unless otherwise specified) Parameter Insertion Loss 1 Insertion Loss 2 Insertion Loss 3 Insertion Loss 4 Insertion Loss 5 Isolation 1 Isolation 2 Isolation 3 Isolation 4 Isolation 5 Return Loss 1 Return Loss 2 Return Loss 3 Return Loss 4 0.1 dB Loss Compression Input Power Note 3 Symbol Lins1 Lins2 Lins3 Lins4 Lins5 ISL1 ISL2 ISL3 ISL4 ISL5 RL1 RL2 RL3 RL4 Pin (0.1 dB) Test Conditions f = 0.05 to 0.5 GHz f = 0.5 to 2.0 GHz f = 2.0 to 2.5 GHz f = 2.5 to 3.8 GHz f = 3.8 to 6.0 GHz f = 0.05 to 0.5 GHz f = 0.5 to 2.0 GHz f = 2.0 to 2.5 GHz f = 2.5 to 3.8 GHz f = 3.8 to 6.0 GHz f = 0.05 to 0.5 GHz f = 0.5 to 2.0 GHz f = 2.0 to 2.5 GHz f = 2.5 to 6.0 GHz f = 0.5 to 6.0 GHz Note 2 Note 1 Note 1 Note 1 MIN. - - - - - - 25 25 25 22 - 15 15 10 - TYP. 0.35 0.40 0.45 0.55 0.65 30 30 30 30 27 20 20 20 15 +34.0 MAX. - 0.65 0.70 0.80 0.90 - - - - - - - - - - Unit dB dB dB dB dB dB dB dB dB dB dB dB dB dB dBm Note 2 Note 2 Note 2 1 dB Loss Compression Input Power Note 4 Pin (1 dB) f = 0.05 to 0.5 GHz f = 0.5 to 6.0 GHz Note 1 - +34.0 - - - - - +36.0 +36.0 70 70 +60 0.1 100 - - - - - 10 250 dBm dBm dBc dBc dBm Note 2 2nd Harmonics 3rd Harmonics Input 3rd Order Intercept Point Switch Control Current Switch Control Speed 2f0 3f0 IIP3 Icont tSW f = 2.5 GHz, Pin = +30 dBm f = 2.5 GHz, Pin = +30 dBm f = 2.5 GHz No RF input 50% CTL to 90/10% RF A ns Notes 1. DC blocking capacitors = 1 000 pF at f = 0.05 to 0.5 GHz 2. DC blocking capacitors = 56 pF at f = 0.5 to 2.0 GHz 3. Pin (0.1 dB) is the measured input power level when the insertion loss increases 0.1 dB more than that of the linear range. 4. Pin (1 dB) is the measured input power level when the insertion loss increases 1 dB more than that of the linear range. Caution It is necessary to use DC blocking capacitors with this device. Data Sheet PG10773EJ01V0DS 3 PG2409T6X EVALUATION CIRCUIT 1 000 pF C1 RF1 1 6 2 5 3 C1 4 C1 Note Vcont1 RFC RF2 Vcont2 1 000 pF Note C1 : 0.05 to 0.5 GHz 1 000 pF : 0.5 to 2.0 GHz : 2.0 to 6.0 GHz 8 pF 56 pF The application circuits and their parameters are for reference only and are not intended for use in actual design-ins. APPLICATION INFORMATION C1 Switch C1 LESD C1 * C1 are DC blocking capacitors external to the device. * The RF ground connections should be kept as short as possible and connected to directly to a good RF ground * LESD provides a means to increase the ESD protection on a specific RF port, typically the port attached to the antenna. for best performance. The value may be tailored to provide specific electrical responses. 4 Data Sheet PG10773EJ01V0DS PG2409T6X TYPICAL CHARACTERISTICS (TA = +25C, DC blocking capacitors = 8 pF, unless otherwise specified) RFC-RF1/RF2 INSERTION LOSS vs. FREQUENCY 0.0 -0.1 Vcont (H) = 3.0 V -0.2 0 -10 RFC-RF1/RF2 ISOLATION vs. FREQUENCY Vcont (H) = 3.0 V Insertion Loss Lins (dB) Isolation ISL (dB) -0.3 -0.4 -0.5 -0.6 -0.7 -0.8 -0.9 -1.0 0.0 1.0 2.0 3.0 4.0 5.0 6.0 -20 -30 -40 -50 -60 0.0 1.0 2.0 3.0 4.0 5.0 6.0 Frequency f (GHz) Frequency f (GHz) RFC RETURN LOSS vs. FREQUENCY 0 -5 Vcont (H) = 3.0 V RF1/RF2 RETURN LOSS vs. FREQUENCY 0 -5 Vcont (H) = 3.0 V Return Loss RL (dB) -15 -20 -25 -30 -35 -40 0.0 1.0 2.0 3.0 4.0 5.0 6.0 Return Loss RL (dB) -10 -10 -15 -20 -25 -30 -35 -40 0.0 1.0 2.0 3.0 4.0 5.0 6.0 Frequency f (GHz) Frequency f (GHz) -0.2 -0.4 -0.6 -0.8 -1.0 RFC-RF1/RF2 INSERTION LOSS, Icont vs. SWITCH CONTROL VOLTAGE (H) 1.0 0 -10 RFC-RF1/RF2 ISOLATION vs. SWITCH CONTROL VOLTAGE (H) Insertion Loss Lins (dB) f = 2.5 GHz Lins 6.0 GHz 0.8 0.6 0.4 0.2 Icont (No RF input) 0.0 3.5 Switch Control Current Icont (A) Isolation ISL (dB) -20 -30 -40 -50 -60 2.0 f = 6.0 GHz 2.5 GHz -1.2 2.0 2.5 3.0 2.5 3.0 3.5 Switch Control Voltage (H) Vcont (H) (V) Switch Control Voltage (H) Vcont (H) (V) Remark The graphs indicate nominal characteristics. Data Sheet PG10773EJ01V0DS 5 PG2409T6X RFC RETURN LOSS vs. SWITCH CONTROL VOLTAGE (H) 0 -5 Return Loss RL (dB) Return Loss RL (dB) RF1/RF2 RETURN LOSS vs. SWITCH CONTROL VOLTAGE (H) 0 -5 -10 -15 -20 -25 -30 -35 2.5 GHz f = 6.0 GHz -10 -15 -20 -25 -30 -35 -40 2.0 2.5 3.0 3.5 2.5 GHz f = 6.0 GHz -40 2.0 2.5 3.0 3.5 Switch Control Voltage (H) Vcont (H) (V) 0.1 dB Loss Compression Input Power Pin (0.1 dB) (dBm) Switch Control Voltage (H) Vcont (H) (V) -0.2 -0.4 -0.6 -0.8 -1.0 RFC-RF1/RF2 INSERTION LOSS, Icont vs. INPUT POWER Lins f = 2.5 GHz 5 Switch Control Current Icont (A) 38 36 34 32 30 28 26 2.0 RFC-RF1/RF2 Pin (0.1 dB) vs. SWITCH CONTROL VOLTAGE (H) f = 2.5 GHz Insertion Loss Lins (dB) 4 3.3 V 3.0 V Vcont (H) = 2.7 V 3.3 V 3.0 V 2.7 V 25 30 35 3 2 1 0 40 Icont -1.2 15 20 2.5 3.0 3.5 Input Power Pin (dBm) Switch Control Voltage (H) Vcont (H) (V) -30 Output Power Pout (dBm) 3rd Order Intermoduration Distortion IM3 (dBm) RFC-RF1/RF2 2f0, 3f0 vs. INPUT POWER Vcont (H) = 3.0 V -40 Vcont (L) = 0 V f = 2.5 GHz -50 -60 -70 -80 -90 2f0 3f0 RFC-RF1/RF2 OUTPUT POWER, IM3 vs. INPUT POWER 80 60 40 20 0 -20 -40 -60 -80 0 10 20 IM3 30 40 50 Vcont (H) = 3.0 V Vcont (L) = 0 V f = 2.5 GHz 60 70 Pout 2nd Harmonics 2f0 (dBc) 3rd Harmonics 3f0 (dBc) -100 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 Input Power Pin (dBm) 80 Input Power Pin (1 Tone) (dBm) Remark The graphs indicate nominal characteristics. 6 Data Sheet PG10773EJ01V0DS PG2409T6X MOUNTING PAD AND SOLDER MASK LAYOUT DIMENSIONS 6-PIN PLASTIC TSON (UNIT: mm) MOUNTING PAD 0.3 0.5 0.3 1.0 0.3 0.2 0.3 SOLDER MASK 0.475 0.25 0.475 0.35 0.55 0.15 0.25 Solder thickness : 0.08 mm Remark The mounting pad and solder mask layouts in this document is for reference only. bridge and so on, in order to optimize the design. When designing PCB, please consider workability of mounting, solder joint reliability, prevention of solder 0.5 0.5 0.5 0.5 Data Sheet PG10773EJ01V0DS 7 PG2409T6X PACKAGE DIMENSIONS 6-PIN PLASTIC TSON (T6X) (UNIT: mm) (Top View) 1.50.1 (Side View) (Bottom View) 0.30.07 (0.24) 0.50.06 1.50.1 0.37+0.03 -0.05 0.08 MIN. 0.2+0.07 -0.05 0.20.1 A A 0.70.1 Remark A>0 ( ) : Reference value 8 Data Sheet PG10773EJ01V0DS 1.20.1 PG2409T6X RECOMMENDED SOLDERING CONDITIONS methods and conditions other than those recommended below, contact your nearby sales office. Soldering Method Infrared Reflow Time at peak temperature Soldering Conditions Peak temperature (package surface temperature) : 10 seconds or less : 12030 seconds : 3 times : 260C or below This product should be soldered and mounted under the following recommended conditions. For soldering Condition Symbol IR260 Preheating time at 120 to 180C Time at temperature of 220C or higher Maximum number of reflow processes : 60 seconds or less Maximum chlorine content of rosin flux (% mass) Partial Heating Peak temperature (terminal temperature) Maximum chlorine content of rosin flux (% mass) Soldering time (per side of device) : 0.2%(Wt.) or below HS350 : 350C or below : 3 seconds or less : 0.2%(Wt.) or below Caution Do not use different soldering methods together (except for partial heating). Data Sheet PG10773EJ01V0DS 9 PG2409T6X WiMAX is a trademark or a registered trademark of the WiMAX Forum. * The information in this document is current as of July, 2009. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. * NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC Electronics endeavors to enhance the quality and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. In addition, NEC Electronics products are not taken measures to prevent radioactive rays in the product design. When customers use NEC Electronics products with their products, customers shall, on their own responsibility, incorporate sufficient safety measures such as redundancy, fire-containment and anti-failure features to their products in order to avoid risks of the damages to property (including public or social property) or injury (including death) to persons, as the result of defects of NEC Electronics products. * NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customerdesignated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) (1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. (2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above). M8E0904E 10 Data Sheet PG10773EJ01V0DS PG2409T6X Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. * Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. * Do not burn, destroy, cut, crush, or chemically dissolve the product. * Do not lick the product or in any way allow it to enter the mouth. |
Price & Availability of UPG2409T6X-E2-A
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |